When installing a water heater, you should follow the proper procedures thoroughly listed. Gas lines should be secured securely and electrical wires should be protected by a conduit. If the installation is being performed in an attic, the electrical wires should be of the correct gauge for the water heater. Moreover, the water heater should be located in a central location.
You should also make sure that the hot and cold water pipes are disconnected from each other. You can do this by installing flexible tubes between them. Then, use male-threaded adapters on the ends of the hot and cold water pipes. Then, fit the flexible tubes between the adapters. Then, secure the fittings with coupling nuts.
Choosing a plumber to complete the installation is the best option. This task requires a great deal of skill and expertise. You should have plumbing and electrical knowledge and be aware of state and local building codes. You should also check with your local building department to make sure you meet all the requirements before the installation. You should also have the proper permit and arrange for an inspection.
Professional installation costs about $500 for a standard tank-style water heater. As a result, many homeowners are considering doing the installation themselves. This can be a challenging and time-consuming project, but it is possible for experienced do-it-yourselfers to accomplish the work themselves. However, it is not a good choice for beginners.
The cost of water heater installation throughout the States can range from $150 to $800 depending on the type of heater you purchase and the type of installation. You should consult a licensed plumber for an exact quote. The total cost depends on the type of water heater you choose, how much energy it consumes, and whether there are any extra labor charges. If you want to save money, consider installing a tankless water heater. The price is slightly higher than a tank water heater, but the upfront cost is much less.
Another factor that affects the cost of installation is the type of venting system you choose. There are two main types: atmospheric and power venting. The former draws air around the water heater and vents it through an upward-sloping duct. This method requires additional electrical work and wiring. A power venting system can cost up to $1,000 more than a direct venting system.
If you’re converting from electric to gas, you may need to install new gas pipes. This process can add an additional $250 to $1,000 to the overall cost of the job. In some cases, it might even require the addition of a new wall. In addition to this, the plumber may also need to make changes to the plumbing.
Changing fuel sources can also increase the cost of water heater installation. Converting from electric to gas can add another $1,500 to $2,300. You may also need to run new water lines or run gas lines to your new water heater. Additionally, you may have to hire an electrician and plumber to do the job.
If you choose a gas water heater, make sure that you buy a tank that is the right size for your home. If you have a smaller home, a thirty to forty-gallon gas tank will provide plenty of hot water. However, if you live in a larger house, you may need a 60-gallon tank. You should also consider the cost of energy efficiency when choosing the fuel type. This may save you money in the long run.
If you live in a building where local permits are required, the plumber will also need to install an expansion tank, which prevents the pipes from bursting during the installation. This extra cost will likely be between $100 and $350. The cost of a tank can also depend on the size of your tank and the accessibility of the water supply.
Home Depot is one of the top companies that provide water heater installation services. They have high ratings, with an average of 4.4 out of 5 stars. All of their installers are licensed by the manufacturers, and many customers have had a good experience. However, there have also been some complaints, including improper billing and communication problems.