Home » Plumbing Services (Page 2)

Category Archives: Plumbing Services

February 2024
M T W T F S S
 1234
567891011
12131415161718
19202122232425
26272829  

Become a Plumber and Make a Good Living

Those who are looking to become a plumber need to be sure of the duties and training involved. A plumber is a professional who can install and repair plumbing systems. He or she can also perform other duties, such as water testing and drain cleaning.

Plumber

Whether you are just starting out in the plumbing industry or are a seasoned veteran, you can rest assured that you are well on your way to making a decent living. There are many factors that play a role in your salary, from the city you live into the type of work you do.

The best way to figure out what your salary will be is to figure out what the average plumber’s salary is in your area. You can do this by looking at the salary statistics in your state, as well as the salary statistics of other cities.

The amount of money you can earn as a plumber depends on a number of factors, including experience, location, and certification. If you can find a job in an area with high demand for plumbing services, you’ll have a good chance of finding work and making good money.

If you live in a state with a higher minimum wage than the national average, your salary will be affected. Similarly, in states with a smaller pool of applicants, you might find it more difficult to find work.

The average salary for a plumber in the States is $50,000. This isn’t bad, but you’ll also have to contend with the fact that you won’t be paid as much as in some other careers. However, plumbers who have completed plumbing training will earn more than their counterparts.

If you live in a state, your salary will probably be much less. However, if you live in a state, you can expect to earn more.

The average plumber’s salary in the States is slightly less than the national average. However, you’ll be able to make good money in most states. In fact, if you live in a big city, your salary might be higher than the average plumber’s salary in any other city in the country.

Typically, Plumbers work on a full-time basis. However, they also work on a part-time basis and on a call-in basis. They can be required to work long hours in awkward positions and in cramped spaces. They are also often required to work in poor weather.

Plumbers are required to follow building codes and have good problem-solving skills. They are responsible for testing and commissioning mechanical systems. They also help to install new plumbing fixtures and repair existing ones. Plumbers are trained to install water lines, faucets, and showers. They are also trained to inspect and repair broken or clogged pipes. They can be expected to perform these tasks in residential settings, in factories, or on civil sites.

They may work in conjunction with electricians and carpenters. They may also be required to lift heavy objects. They may also be exposed to hazardous materials such as lead and sulfur dioxide. They may also be required to operate specialized tools such as gauges and measuring devices.

Plumbers may also work on construction sites, demolition sites, and offices. They may also be required to travel to various work sites throughout the day. They may also be required to work in cold or hot weather. Some plumbers may also be required to work evenings and weekends.

Some plumbers may work for maintenance businesses, while others may work for industrial manufacturing. Plumbing is a highly technical trade, and plumbers must be very skilled and knowledgeable in the field. Plumbing professionals must also have knowledge of chemistry, applied physics, and water science.

Water Heater Installation – Do it Yourself Or Hire a Plumber

When installing a water heater, you should follow the proper procedures thoroughly listed. Gas lines should be secured securely and electrical wires should be protected by a conduit. If the installation is being performed in an attic, the electrical wires should be of the correct gauge for the water heater. Moreover, the water heater should be located in a central location.

You should also make sure that the hot and cold water pipes are disconnected from each other. You can do this by installing flexible tubes between them. Then, use male-threaded adapters on the ends of the hot and cold water pipes. Then, fit the flexible tubes between the adapters. Then, secure the fittings with coupling nuts.

Choosing a plumber to complete the installation is the best option. This task requires a great deal of skill and expertise. You should have plumbing and electrical knowledge and be aware of state and local building codes. You should also check with your local building department to make sure you meet all the requirements before the installation. You should also have the proper permit and arrange for an inspection.

water heater installation

Professional installation costs about $500 for a standard tank-style water heater. As a result, many homeowners are considering doing the installation themselves. This can be a challenging and time-consuming project, but it is possible for experienced do-it-yourselfers to accomplish the work themselves. However, it is not a good choice for beginners.

The cost of water heater installation throughout the States can range from $150 to $800 depending on the type of heater you purchase and the type of installation. You should consult a licensed plumber for an exact quote. The total cost depends on the type of water heater you choose, how much energy it consumes, and whether there are any extra labor charges. If you want to save money, consider installing a tankless water heater. The price is slightly higher than a tank water heater, but the upfront cost is much less.

Another factor that affects the cost of installation is the type of venting system you choose. There are two main types: atmospheric and power venting. The former draws air around the water heater and vents it through an upward-sloping duct. This method requires additional electrical work and wiring. A power venting system can cost up to $1,000 more than a direct venting system.

If you’re converting from electric to gas, you may need to install new gas pipes. This process can add an additional $250 to $1,000 to the overall cost of the job. In some cases, it might even require the addition of a new wall. In addition to this, the plumber may also need to make changes to the plumbing.

Changing fuel sources can also increase the cost of water heater installation. Converting from electric to gas can add another $1,500 to $2,300. You may also need to run new water lines or run gas lines to your new water heater. Additionally, you may have to hire an electrician and plumber to do the job.

If you choose a gas water heater, make sure that you buy a tank that is the right size for your home. If you have a smaller home, a thirty to forty-gallon gas tank will provide plenty of hot water. However, if you live in a larger house, you may need a 60-gallon tank. You should also consider the cost of energy efficiency when choosing the fuel type. This may save you money in the long run.

If you live in a building where local permits are required, the plumber will also need to install an expansion tank, which prevents the pipes from bursting during the installation. This extra cost will likely be between $100 and $350. The cost of a tank can also depend on the size of your tank and the accessibility of the water supply.

Home Depot is one of the top companies that provide water heater installation services. They have high ratings, with an average of 4.4 out of 5 stars. All of their installers are licensed by the manufacturers, and many customers have had a good experience. However, there have also been some complaints, including improper billing and communication problems.

The Salary of a Plumber

A plumber is a person who installs drainage and potable water systems. In addition, a plumber works on sewer systems and sewage systems. This type of job requires a high level of technical expertise. As a result, it can be demanding, so be prepared for long hours and physical challenges. A plumber can earn up to $76,000 per year.plumber

As a plumber, your work environment should be safe and clean. Plumbing contractors are often exposed to hazards such as confined spaces, biohazards, and hazardous substances. Plumbers must use protective gear and follow proper handling procedures to avoid injury. They should also be trained to avoid lifting heavy objects. In addition, plumbers should be familiar with health and safety regulations and their importance in the workplace.

Plumbers must also be physically fit because plumbing requires a lot of physical exertion. Despite this, they are often working alone, which means they must be able to prioritize projects and work efficiently without supervision. Lastly, plumbers must have the physical strength and flexibility to perform work in tight spaces.

According to the Bureau of Labor Statistics, plumbers should enjoy better employment prospects over the next few years. According to the BLS, plumbers can expect a 5% increase in jobs over the next eight years. This is about the average rate of growth for all occupations. If you are interested in learning more about this profession, consider enrolling in PCI’s Plumbing program. This training program will give you the skills and knowledge needed to pursue a new career in this field or advance your career in your current role.

As a plumber, you should be able to read blueprints and build a good understanding of these blueprints. You may also be required to work at hospitals or infirmaries, installing medical gas and oxygen. You should also take courses in technical training schools or apprenticeship programs. High school courses that prepare you for a plumbing career include mechanical drawing, drafting, algebra, and mathematics. If you have these, you can also pursue a career in the construction industry.

Plumbers must be able to dismantle and install plumbing devices, as well as interpret building plans and plumbing schematics. They also have to estimate time and materials for plumbing jobs. They should also have a thorough knowledge of materials, methods, and tools. They should be physically fit to perform their duties. They must also be able to lift, bend, and climb ladders.

Plumbers must have a high level of physical endurance. They must be able to endure working at high temperatures and in tight spaces. Plumbing technicians must also possess good interpersonal skills and be able to interact professionally with clients and supervisors. Additionally, they must be able to manage a diverse range of administrative tasks. In addition to performing a variety of plumbing tasks, plumbers are required to lift and carry up to 50 pounds.

Physical requirements for plumbers vary widely depending on their specialty. They must be able to read blueprints and use plumbing tools. They must also have good communication skills and be able to explain complicated concepts and problems to customers. Some plumbers may be required to pass a state licensing exam in order to practice their trade.

In addition to physical abilities, plumbers must have good manual dexterity and good eyesight. These abilities are essential in this line of work, as plumbers need to use measuring devices and maneuver around tight spaces. Moreover, plumbers are required to be physically fit since they often have to climb ladders and lift heavy items. And remember that plumbing requires a lot of patience and persistence. If you think you have the necessary skills and qualifications, a plumbing career can be the right choice for you.

A plumbing apprenticeship can help you learn the trade from a more experienced plumber. This allows you to learn the trade more in-depth. While training as an apprentice, you must continue to exercise regularly in order to build your physical strength and flexibility. Additionally, you should consider taking a few computer courses to broaden your skills. Some plumber training courses cover word processing, spreadsheet programs, budgeting software, and foundational IT principles.

Plumbing contractors are responsible for installing, maintaining, and repairing pipes in both commercial and residential structures. They also work closely with general contractors to ensure a smooth construction process.

The Differences Between Residential and Commercial Plumbing

residential plumbing

Residential plumbing is one of the most intricate and complicated systems in a home. It includes hot and cold water supply pipes, fixtures, drain pipes, traps, valves, and water storage tanks. Among other things, it disposes of human waste and keeps the water supply running. However, despite its simplicity, residential plumbing can be a complex system to maintain and repair. Here are some tips to help you keep it running smoothly.

Commercial and residential plumbing systems are very different from one another. While a grocery store has an elaborate watering system with sprayers and drains, a restaurant may have multiple toilets and a complicated water heating system. Likewise, a skyscraper’s plumbing system can be highly complex, involving hundreds of pipes and water heaters. Regardless of the size of your home, you’ll need a licensed residential Plumber to service its plumbing systems.

Residential plumbing services include drain cleaning and replacement. Many plumbers would rather fix a damaged drain and avoid replacing it entirely, but there are some times when the drain and sewer system are beyond repair. It’s important to get your system inspected yearly to prevent any major problems, especially during winter when piping can be clogged.

Residential plumbing is less complicated than commercial plumbing. Commercial plumbing systems require a highly specialized level of service. In a commercial building, the plumbing system must be able to handle high volumes of water. These plumbing systems include pipes, faucets, sinks, washers, and drains. When commercial plumbing fails to perform its job correctly, it can create a large water bill and waste.

Commercial plumbing is more difficult to maintain and install than residential plumbing. Commercial plumbing systems can be much larger and more complex, so repairs can take much longer than residential jobs. Additionally, residential plumbing requires a higher level of customer service than commercial plumbing. In addition, commercial plumbing requires a different set of permits and installation processes.

Residential plumbers typically focus on domestic plumbing and home plumbing. The main difference between residential and commercial plumbing is the level of expertise required. A residential plumber is not expected to take on complex commercial plumbing projects, but they are still capable of performing home plumbing jobs. However, they lack the experience and knowledge to take on commercial projects.

Commercial plumbing is generally more complex, with more occupants and more pipes and outlets. This means that commercial plumbing requires higher grade pipe fixtures and outlets. This means that they are more likely to experience more frequent maintenance. Compared to a home, commercial plumbing is more difficult to monitor because there are many different floors and fixtures. Therefore, it is important to maintain the plumbing system properly. Whether you have a large or a small commercial property, it is important to make sure it is working properly.

Before you install a plumbing system, it is important to learn about different types of pipes. Some pipes are used in homes for cold water, while others are used in hot water systems. In addition to understanding the various types of pipe, you should also know about how different materials affect plumbing systems. When it comes to determining the type of pipe you need, you should consult with a plumber.

It is also important to know the size of the pipe. You should choose the most appropriate pipe for the size and type of space in your home. In some cases, narrower pipes are best for confined spaces. When installing the pipe, remember to protect it from freezing. Most homeowners bury the service line at least four feet deep, although the recommended depth varies from north to south. Also, remember to check with local building codes for any regulations regarding plumbing installations.

A good residential plumbing system will have a drain-waste-vent system. The drain-waste-vent system is one of the most important parts of the home plumbing system. It transports waste water and sewage to a sewer or septic tank. It also has a vent system that helps ventilate sewage gases.

Tips On How To Deal With A Plumbing Problem

If you are having issues with your plumbing, you want to make sure that you are taking care of the problem in the best way possible. It may take quite a while to find the real fix to a problem, but with good guidance, you can get things back together and running with confidence.

 

Use the sounds you hear from your pipes to help you to determine what they problem is. Certain sounds mean the water pressure is too high. Other sounds can signify loose pipes or slight clogs from calcium or iron build up. Listening to your pipes can save you a lot of money hunting down the problem.

 

Install screen traps or drain covers on all of your sinks and tub drains. Most home plumbing calls are about clogged pipes. These can be caused by debris, especially hair, washing down the drains. Putting in a trap means that you can clean this debris off before it ends up in the pipes.

 

Think about what plumbing work you need, then schedule them all at once. By doing so, you can save up enough money to pay for the repairs. This can save you money since plumbers generally charge hourly, as they can’t charge multiple hours per trip if it’s only one trip out.

 

You should drain all of the water out of the tank of your hot water heater at least once every three to six months. Draining all of the water out of the tank helps to prevent sediment build-up at the bottom of the tank. This sediment can cause the tank to bang or to heat less efficiently.

 

The next time you prepare to take on plumbing issues, give these tips a once over first. Get the best professionals and take care of what you can so that you can save some money. These tips deserve to be used.

 

Teaching Artists Organized, Queen City PYT, Box Fila, , Hunting Ton Conservatory, The Cure For Jet Lag, Sell My Home Miami, The Curious Thing, ETF-Settlement, APMD Members, Stemgineering Academy, Search-Engine-Fuel, Miami Luxury Town Homes Biltmore, Auto Claims Help, STS Royal, Renew Angel, Tide Tamer Water Front Products, Veranda 804, Culture Kitchen, Fluidic Mems, BHW Translation, Plant Based Toronto, Valley Find Me, Natures Biorganic, Narec Solar, Ameristain Roofing, Diy Investor Resources, Just A Fair Trade, Carlos Prada, The Kap Group, Midwest Grill Saugus, C Fraser Smith, Informational Connectivity, Dallas Content Strategy, DFI-Effc 2018, Rimamassasati, Small-Business-Place, Norwalk Lamirada Plumbing Heating Air Conditioning, Back To The Kitchen, I Love The Love Kitchen, Robert Harris Homes

 

What’s That Smell in My Kitchen?

Do you have a mysterious, unpleasant odor in your kitchen? Something that doesn’t go away, no matter how many times you mop or take out the garbage? Check your kitchen sink.

Your kitchen sink might be the hardest working plumbing appliance in your home. If there’s a problem with it, chances are the food you run through the disposal or the grease you rinse off dirty plates isn’t getting properly removed from your house.

When food or grease gets caught in your kitchen sink’s pipes, it begins to rot. Rotting food or other debris can produce terrible smells and become a breeding ground for bacteria and pests. Even if you don’t have a disposal, the kind of stuff that drops down the kitchen sink’s drain can collect and start to smell surprisingly quickly. If your kitchen sink has a sour odor that you just can’t scrub away, here are a couple possible explanations and what you can do about it.

Grease on plate
Grease in the Drain

If you pour cooking grease or vegetable oil down your kitchen sink’s drain, it can congeal to the sides of the drain, disposal, or lower pipe. Then, the grease starts to decompose and trap other falling debris. Soon, an unruly rotting smell wafts back up out of the sink and into your kitchen.

Scoop about a cup of baking soda into your kitchen sink’s drain. Follow that up with about as much vinegar, then let it sit for about ten minutes. While the mixture is doing its thing, boil a pot of water. When ten minutes have passed, pour the boiling water into the sink. The baking soda and vinegar should foam up and eat away the grease in your drain, and then the boiling water will flush it all out.

Garbage disposal
Dirty Garbage Disposal

Sometimes, scraps of food or other gunk can catch on your garbage disposal’s blades. That food rots and starts to smell. Problems increase if:

You use your garbage disposal often.You run hot water with it.,You run no water.Your garbage disposal is older.

Grab about two cups of ice cubes and a cup of salt. Turn on the kitchen sink’s cold water and run the disposal for about 20 seconds. After that, dump the cups of ice and the salt into the disposal. Let the disposal keep running until all the ice cubes are gone. Cutting up the ice in cold water should have helped clear away the gunk caught on the blades.

For extra odor prevention, drop lemon, grapefruit, or orange rinds down the disposal while you’re running it with the ice. You can also add lemon juice and vinegar.

Kitchen p-trap
Problem with the Trap

If your kitchen sink smells more like sewer than rotten food, there might be a problem with its trap. A kitchen sink’s trap is the ‘P’ or ‘U’-shaped pipe directly beneath the sink basin. The trap’s job is to prevent sewer gas from drifting from the pipes back up into your house. It’s also handy for recovering lost wedding rings.

Usually, a sewer smell means that the water in the trap that blocks sewer gas has evaporated. This can happen if the sink hasn’t been used for awhile. If that’s the case, all you should have to do is run the sink and let the water fill back up in the trap. Watch the trap while running the water to make sure it isn’t leaking.

If that doesn’t fix the problem, take the trap out, empty it, scrub it down with an old toothbrush and a cleaning agent, and replace it. Clogs can build up in kitchen and bathroom traps. They may need to be cleaned periodically but if the problem persists, give us a call.

Roof vents
Clogged Vent

If there’s a sewer smell coming from your sink and you don’t think the trap is the problem, the next most likely culprit is the vent. The plumbing drain vent is basically a long, narrow, vertical shaft connecting your main sewer line to the outside air. This shaft vent stabilizes the pressure inside the pipe connecting to your sewer. Without it, water may siphon out of your sink’s trap, letting sewer gas in.

Plumbing vents are located on the roof of the house. When they’re not working, it’s usually because something is obstructing it, such as a bird’s nest or a piece of debris. There could also be a leak in the vent’s shaft, which would interfere with its pressure mitigation or could even let sewer gas into your house. In either case, you may want to consider calling a professional. Clearing a vent obstruction may not sound like a big job, but roof jobs are always trickier than they seem.

 Keeping L.A. Smelling Good

If your kitchen sink smells, hopefully one of these quick fixes solves the problem. If the stench is coming from a simple clog, try plunging with a cup plunger.

If you’ve tried everything and you’ve still got a bad smell, give us a call. There’s more than one reason Mike Diamond is your “Smell good plumber.” With our pipe cleaning technology and years of experience, we guarantee we’ll find and solve your problem and get your kitchen smelling fresh again.

The post What’s That Smell in My Kitchen? appeared first on Mike Diamond Services.

Did you miss our previous article…
https://www.norwalklamiradaplumbingheatingairconditioning.com/?p=273

How Do I Determine The Right Size Furnace For My Home?

>

When it’s cold outside (even in LA), you need the right furnace to heat your home evenly and efficiently. A furnace can only do its job properly if it’s the right size for the space it’s heating. Too big and it will switch on and off frequently, too small and it will run constantly. Neither is ideal.

A small furnace will lead to high energy bills, uneven heating, and a shorter lifespan. Not to mention the fact that you’ll probably still be cold. A furnace that’s too big, on the other hand, might make parts of your home uncomfortably hot while leaving other areas unproperly heated. This constant cycling in short bursts could wear it out quickly. To avoid these problems, learn how to choose the right sized furnace for your home.

How do I determine the right size furnace for my home?

Gas furnaces are differentiated by their BTU capabilities. BTU stands for British Thermal Units. One BTU represents the amount of energy required to heat one pound of water by one degree Fahrenheit. To determine the proper BTU you’ll need for your home’s heating, you’ll have to do a little math.

First, find out the square footage of your home.

You should be able to find this number on the paperwork you received when you purchased your home. If you can’t find that, you can calculate the square footage yourself.

Start by measuring the length and width of each room in your home. Multiply the length and width of each room together to get the square footage of that room. Then simply add together the square footage of all your rooms.

Don’t include rooms that don’t have ductwork or rooms you don’t plan on heating, like garages or sunrooms. Most furnace size charts operate under the assumption that your ceilings are eight feet high. If your ceilings are higher or lower, make changes to your calculation accordingly.

Determine which climate zone you live in.

The United States is divided into different climate zones, each with its own BTU per square foot recommendation. To heat a home in Minnesota takes more BTUs than a home in Florida. Living in California, your furnace won’t have to be heavy duty.

If you’re working with Mike Diamond, then your home lies in Zone 2 – a hot-dry or mixed-dry climate zone. In Zone 2, you need 35-40 BTUs for each square foot of your home.

Calculate the furnace size you’ll need.

To determine the number of BTUs you need to heat your home: multiply your square footage by the zone heating factor. If your home is well insulated, use the lower number. If your home is not well insulated or has other factors that may make it harder to heat, use the higher number.

For example: in a well-insulated L.A. home that is 2,000 square feet our equation is:

2,000(sq ft) X 35 (zone factor) = 70,000 BTUs

For this home, we need to install a furnace with a rating of 70,000 BTUs. But we have one more step to finding our perfect furnace.

Calculate your new furnace’s actual output.

When you shop for your new furnace, you’ll notice two numbers on it. The first is the amount of heat it will produce in BTUs. The second number is its efficiency rating. To calculate the actual BTU output of any furnace, multiply the two numbers. For example, a furnace capable of 100,000 BTUs at an efficiency rating of 80% will actually produce 80,000 BTUs of heat:

100,000 X 80% = 80,000

Make sure you calculate this properly before installing a furnace that is too small for your space.

Reference a furnace size chart.

You can also compare your home’s square footage to a furnace size chart. There are a number of different furnace size charts out there. These charts give comparisons between home square footage and the BTUs needed to heat it. It’s not as accurate as calculating it yourself. Most charts follow guidelines similar to these:

A 1,200-square-foot home will require between 35,000 and 75,000 BTUs A 1,500-square-foot home will require between 45,000 to 90,000 BTUs A 1,800-square-foot home will require between 55,000 to 110,000 BTUs A 2,100-square-foot home will require between 65,000 to 125,000 BTUs A 2,400-square-foot home will require between 75,000 to 145,000 BTUs

Expert Furnace Service and Installation in Los Angeles

If you’re interested in updating or upgrading your home’s furnace, give Mike Diamond a call. Our expert technicians can answer your questions about the make, model, and size of the perfect furnace for your home. We’ll be able to get your just right furnace installed quickly and efficiently.

The post How Do I Determine The Right Size Furnace For My Home? appeared first on Mike Diamond Services.

Did you miss our previous article…
https://www.norwalklamiradaplumbingheatingairconditioning.com/?p=258

What to Do if Your Tap Has Rusty Water

You just woke up and you’re about to brush your teeth. You stick your brush under the tap, turn the water on, and… a stream of brown, cloudy mush drizzles out.  Rust colored water isn’t normally harmful but it can be disturbing.  The causes can range from corroded pipes to mineral build up to utility company operations.

Seeing your home’s tap water turn rusty is a traumatizing experience, especially if you don’t know why it’s happening. That’s why we put together this primer to explain why your water is rusty looking. If the reason for your home water discoloration is rusty pipes, we’ll explain what you can do about it. We want all Los Angeles residents to have clean, safe drinking water in their homes.

iron, one of the elements that makes water look rusty

What Makes Water Brown?

Tap water looks rusty brown, yellowish, or reddish when it contains an excess of sediment or minerals.

The most common discoloring minerals present in water are iron and manganese. Tiny metallic deposits of these minerals can get into the water stream via several different sources – natural or manmade. These minerals can also be responsible for any unpleasant tastes or smells your water might have.

Is Rusty Water Dangerous?

It depends on the particular minerals in your water, but probably not. The EPA regulates the treatment of drinking water contaminants according to primary and secondary standards. Dangerous contaminants like lead and arsenic are covered by the primary regulations. If these contaminants exceed a maximum contaminant level in a water supply, it (usually) isn’t supplied to the public.

The secondary EPA regulations cover contaminants like iron and manganese. These contaminants aren’t dangerous to health but taste, smell, or look bad and could stain clothing or cause skin rashes. Public water systems are compelled to test for primary contaminants on a regular basis but testing for secondary contaminants is unfortunately voluntary. Rusty water might be gross and inconvenient, but it’s not actually dangerous to drink or bathe in.

Rusty pipes

Why Is My Water Brown?

Any of the following symptoms could cause brown water from the faucets in your home. Diagnose your water problem using these three common scenarios:

If all your hot and cold water suddenly goes brown:

It may be the result of a nearby break in a city-operated water main or fire hydrant. Much of America’s plumbing infrastructure is outdated, so water main breaks that release sediment into the water supply happen frequently.

It’s also possible that either your water heater or your water supply pipes have become rusty or corroded, and you’re just now starting to see the effects.

If only your hot water is discolored:

Sediment or rust may have built up in your water heater’s tank.

If you get brown water from your cold tap and only certain faucets:

The problem is probably with a particular water supply pipe.

fixing rusty pipes

How To Fix Reddish Brown Water

Now that you have an idea of what caused your rusty water discoloration in the first place, you know where to start:

If all your hot and cold water suddenly goes brown:

Call your water supply company. Chances are, something happened to a water main or a nearby fire hydrant. It’s also possible that the city is conducting maintenance on the pipe system, and they inadvertently stirred up some sediment. They should be able to tell you when your water will clear up again and what they’re doing to fix the problem.

Once the utility work is done, run your taps for a few minutes until you no longer see orange water coming out of your faucets. Brown water in toilets should disappear after a couple of flushes refresh the water supply.

If all your hot water is discolored:

Try draining and flushing your water heater’s tank. Rusty hot water is often the result of sediment that’s built up over time. It’s a good idea to drain and flush your tank twice a year. Sediment buildup isn’t just bad for your water; it’s one of the most common causes of water heater leaks.

If you flush the tank or have a newer water heater and your hot water is still off-colored, you may have a more significant problem. Call a professional plumber to diagnose the issue. Too much sediment buildup could permanently damage your water heater, or (in rare and extreme circumstances) cause it to explode!

If your cold water is only discolored when it comes out of a few faucets:

Start by running those faucets at full pressure for about several minutes or until the water clears completely. Sometimes, a small amount of rust may dislodge from the inner walls of a pipe and enter the water supply. If the problem is that minor, simply running the water should clean out the rust and clear the water again.

If your water still looks rusty after running it, however, or if the problem returns shortly after you flush the rust, it may be because your pipes have corroded. When too much corrosion or rust builds up on the pipe walls of your home’s water supply pipes, then minerals will leach into your water constantly, and you will continue to have brown water from your cold tap.

If you have a corroded or rusted pipe, you should have it deep cleaned or replaced ASAP, before it causes even more serious problems.  Corroded pipes can lead to clogs and possible leaks or breaks in your water line.

Get Rid of Brown Rusty Water in Your Home

If you’ve tried everything and remain frustrated by rusty water coming from your tap, remember that Mike Diamond has your back. Give us a call, and we’ll diagnose why your faucets are spewing out that ugly brown stuff and make sure your pipes are transporting clean, clear water to you and your family.

Nobody in Los Angeles should have to shower in–much less drink!–rusty water. We’ll make sure you never have to.

The post What to Do if Your Tap Has Rusty Water appeared first on Mike Diamond Services.

How to Fix a Loose Toilet Handle

>

A loose or wiggly toilet handle can be annoying. A toilet handle not flushing at all is even worse.

Luckily, a loose toilet handle is a minor toilet problem and one that’s usually easy to fix. Here’s how you can fix a broken toilet handle, either by tightening or replacing it.

How to Tighten a Toilet Handle

Close the toilet seat cover.Keep parts or tools from falling in.

Remove the toilet tank cover.Use two hands as it may be heavy and set it on a flat surface where it won’t fall or crack.

Shut off the water supply to your toilet.The shut-off valve should be located near the base towards the back of your toilet.

Press the toilet tank lever to empty the water from the tank.This allows you easier access to the inside of the handle.

Find the toilet handle nut.It will be on the inside of the porcelain wall adjacent to the handle. This is probably the source of your loose toilet handle.

Tighten the toilet handle nut.Use an adjustable wrench or pliers clockwise to ensure the nut fits snuggly. Do not over-tighten – it could cause your porcelain tank to crack.

Depress the toilet handle to test.If it feels and sounds better, well done. If not, read on to learn how to replace a toilet handle.

Turn water supply back on.Turn the shut-off valve counter clockwise to open. Your tank will refill.

How to Replace a Toilet Handle

Determine what hardware you’ll need for your toilet lever replacement. Most hardware stores sell universal toilet handles, but you may need a specific variety. Look up your existing brand name, model, and make to see what type of flush handle replacement will work.Close the seat, remove the tank lid, turn off the water and empty the tank. (See 1-4 above.)Look inside the tank and unclasp the chain clip that’s attached to the lever. This is a small chain hooked onto the inside portion of your toilet handle.Remove the mounting nut. This is the same nut you would have tightened in the first walkthrough up above. Use a wrench or pliers to unscrew the nut (counter-clockwise) and take it off. Pull the old handle out. Once the nut and chain holding it in place are removed, you can pull it out by hand. You might have to angle it a bit to get it out, but that’s normal.Unscrew the mounting nut on the new handle nut, but don’t lose it. The nut may be metal or plastic.Insert the new lever into the tank to match the position of old one. You’ll know it’s in right when the handle is flush with the side of the tank. Secure the handle from inside the tank with the new mounting nut.
A person tests their toilet lever replacement.
Attach the chain to one of the holes in the lever. There are usually a few to choose from. You want around one inch of slack in the chain so that it flushes properly. Try a few of the different holes in the lever until you find the right length.Turn the water back on and test it out. It should flush easily, without rattling.

Congratulations! You now know how to install a toilet handle.

By following these steps, you have hopefully fixed or replaced your loose toilet handle.

If your toilet handle broke or keeps coming loose, get in touch with Mike Diamond. We’ll diagnose the problem and make sure your toilet is working properly. No matter what your toilet question, Mike Diamond – your trusted LA plumber – has the answer.

The post How to Fix a Loose Toilet Handle appeared first on Mike Diamond Services.

Did you miss our previous article…
https://www.norwalklamiradaplumbingheatingairconditioning.com/?p=197

Why Is That Light Bulb Flickering?

A flickering light bulb is the electrical equivalent of a dripping faucet. It may not seem like a big deal but soon enough it will start chipping away at your sanity. Before you throw the lamp and the table it was on out the window, let us diagnose the issue.

Flickering lights don’t have to be your dim future when you keep your home’s electricity working great. Once you figure out what’s causing the flickering, you may be able fix the problem yourself. Here’s a list of possible reasons why different lights may flicker and how to fix the problem.

1.Does Your Light Bulb Have A Loose Connection?

The most obvious and easily fixed reason why your light bulb is flickering is that it’s not properly seated in its socket. If this is the case, it’ll periodically disconnect from its power supply.  When the bulb flickers quickly and repetitively, it’s continually re-connecting and disconnecting from the power in the lamp. If the light flickers when you nudge the lamp, then the bulb is probably loose.

Fixing a loose bulb is hopefully as easy it sounds, and you just need to tighten it. Once it’s fully tightened, the bulb’s receiver should be properly connected with the lamp’s power supply. To tighten your bulb, simply make sure the bulb is cool enough to touch and turn it clockwise in its socket. Don’t try to force the tightening; if it’s not easy to turn, the issue may lie elsewhere.

2. Is Your Light Bulb Faulty?

If the bulb is tight but still flickers constantly, it could be faulty or burned out. Incandescent light bulbs can stop working correctly for all kinds of reasons. Contact problems, faulty wiring connections, worn-out receptacles, or a bad filament can all cause flickering. Often, these problems occur as the light bulb ages. They could also happen as the result of wear-and-tear, improper voltage, or bad wiring inside the fixture.

Older fluorescent lights won’t turn on sometimes and are more prone to flicker if they are dying. You can try rotating a bulb in its fixture to create a better connection, but chances are, it needs to be replaced.

Replacing light bulbs is easy and relatively cheap. As long as you tightened the new bulb correctly, your flickering should stop. If not, read on.

3. Is Your Light Bulb Fixture Causing it to Flicker?

An easy way to check if your light fixture is the problem is to remove the light bulb and try it in a different fixture. If it works, it may indicate that the first fixture is the problem. Over time sockets can wear out and the metal components no longer make a secure connection. The internal wiring could also be faulty.

A worn out fixture will need to be repaired or replaced. If the fixture is connected to your home, you may wish to have a professional electrician make the repair or replacement.

Is the fixture faulty?
4. Is the Light Switch or Circuit Causing Your Lights to Flicker?

If it’s not the bulb or the light fixture, it may be that your home’s wiring is the reason why your light bulbs are flickering. A bad connection in your fixture’s on/off switch may result in irregular flickering. If you wiggle the switch and the light flickers, you’ve likely found the problem and you can replace that switch.

If you experience multiple lights flickering, especially when you have other appliances running, it may be an overloaded circuit. Your home is wired on different circuits – usually room by room – that deliver a finite amount of electrical current. If you have too many items plugged in or are drawing too much power from the circuit, it may affect your lights. You’ve probably seen this when you turn on a high-power appliance like a blender and the kitchen lights dim.

If your home’s wiring is older, it may not be keeping up with increased power demand. A professional electrician can replace your service panel and supply your home with more amperage to meet your needs.

5. Why Is Your LED Light Blinking on and Off?

You’ve upgraded your home to more efficient and longer lasting LED bulbs. Good plan. But are you using a dimmer switch? Not all LED bulbs are dimmable. Only certain kinds that are labeled “dimmable” will work, especially with an older dimmer switch.

You can replace the light bulb with the proper type, but you may need to upgrade your dimmer switch as well. A professional electrician can advise you on the best way to upgrade your lights and switches to make sure they are compatible and function properly.

How Many Times Do You Need to Change Your Light Bulbs?

If flickering bulbs and lights that don’t work properly have left you in the dark, give Mike Diamond a call. We’re your L.A. area experts for all your home plumbing and electrical needs. And even when you can’t see, we’re your “smell good plumber!”

The post Why Is That Light Bulb Flickering? appeared first on Mike Diamond Services.

Did you miss our previous article…
https://www.norwalklamiradaplumbingheatingairconditioning.com/?p=166