Home » Articles posted by Charles Jones
Author Archives: Charles Jones
Why It’s Important to Call an Emergency Plumber
When you have a plumbing problem that needs immediate attention, contacting a plumber near you is important. A reputable and reliable emergency Plumbers Lexington KY will respond quickly to your call, preventing further damage to your property.
Keeping their number in your contacts will give you peace of mind. Read on for four reasons why you should hire an emergency plumber.
When you have a plumbing issue that cannot wait until regular business hours, it’s time to call in an emergency plumber. These professionals handle problems that could become a financial or aesthetic disaster if not taken care of immediately. Whether it’s a burst pipe, water leak or clogged toilet, they have the tools and skills to fix it fast.
There are several signs that you might need an emergency plumber, including water stains on the ceiling or walls, discolored or rusty faucets, water leaking from under sinks and musty odors in the home. These issues are all serious and should be handled as soon as possible to avoid further damage and high utility bills.
A leaky roof is another reason to call for emergency services. If left unattended, it can lead to extensive and costly water damage to the interior and exterior of your home. Emergency plumbers are available to help you with these emergencies at any time of the day or night.
You should also consider calling an emergency plumber if you have a sewer backup. This can cause health hazards and contaminate the household water supply. This problem should be dealt with as soon as possible to avoid serious consequences.
Another sign that you need an emergency plumber is if your water is discolored or tastes different than usual. This means that the pipes are contaminated and it is not safe to drink or wash with.
While a clogged toilet is not as serious as a sewer backup, it still needs to be addressed quickly. It can prevent you from using the toilet, taking a shower or washing dishes, which is a major inconvenience. Plus, it’s hard to live without clean water!
They Don’t Waste Your Time
Emergency Plumbers are trained to deal with any situation, regardless of how big or small it is. This includes situations where there’s a risk of water damage, or where people are at a greater risk for health issues such as those caused by a gas leak. Emergency plumbers also know how to spot and repair a problem immediately, which can prevent it from worsening and save you time and money in the long run.
When choosing an emergency plumber, be sure to choose one that is licensed and reputable. A reputable company will vet its workers and do a thorough background check to ensure your safety. They should also communicate clearly, and be available to answer any questions you may have. This will help you to feel comfortable with the plumber working on your property.
Plumbing emergencies can easily turn into major disasters if left unattended. For example, a simple leaking pipe can lead to water damage, mold growth, and structural damage. It is important to hire a skilled emergency plumber as soon as possible to avoid further damages and costly repairs.
You should also call a plumber right away if you notice that your water is discolored. This is a sign that the pipes are contaminated and can cause serious health problems. Emergency plumbers are trained to turn off your water supply and fix the problem as quickly as possible.
A clogged drain is another common plumbing emergency that requires immediate attention. It is important to avoid putting any objects down the drains that can cause them to clog, such as wipes, paper towels, and hair. It is also a good idea to have regular plumbing maintenance services done, so that you can avoid clogs and other problems.
A reputable plumbing company will offer an ongoing maintenance service and guarantee the work performed by their plumbers. This means that if the problem occurs again within a certain period of time, the plumber will come back and fix it at no extra cost to you. This will give you peace of mind and ensure that you get the best value for your money.
They Fix the Issue Quickly
The sooner you call an emergency plumber, the faster they can help you fix your problem. You don’t want to wait for too long since leaks can cause extensive damage to your home. Water can seep through walls and floors, causing mold and mildew to grow. It can also reach electrical wiring, which could lead to a fire hazard. Additionally, water can cause flooding in your home, leading to damaged carpets and drywall.
Emergency plumbers can come to your home at any time, including nights and weekends. They can assess the situation and make recommendations on how to proceed. They’ll also work quickly to get the job done so you can go back to your normal life.
One of the most common reasons people call an emergency plumber is for clogged drains. When a toilet or drain is clogged, it’s important to turn off the water supply so the plumber can access the clog and repair it before it worsens. It’s also helpful to have a lot of towels or rags available to soak up excess water while you wait for the plumber to arrive.
Another common plumbing emergency is a sewer backup. This is a serious issue that can affect your health and cause significant damage to your home. Emergency plumbers can help you figure out what’s causing the backup and either fix it or work with your local municipality to address the problem.
When you’re looking for an emergency plumber, it’s crucial to find a reputable company that has experienced technicians and offers competitive rates. You can start by contacting several plumbers to compare their services and costs. It’s also a good idea to check online reviews and testimonials. This will help you choose a plumber who will provide high-quality service and is trustworthy.
In addition to providing immediate assistance, emergency plumbers can help you prevent future problems. For example, they can show you how to maintain your plumbing system to reduce the likelihood of an emergency. They can also recommend new fixtures and appliances that will be more energy-efficient than your current ones. They can even offer tips on how to minimize your plumbing bills.
They Give You Peace of Mind
If you have a plumbing emergency at home, it’s natural to panic and want to solve the problem as quickly as possible. However, this can lead to more damage and cost you a lot of money in the long run. To avoid this, it’s advisable to hire a professional plumber. A professional will be able to assess the situation and provide a permanent solution to the problem. They will also ensure that the problem doesn’t get worse during the repair process.
In addition to fixing the problem, a skilled plumber will be able to give you peace of mind. They will provide a guarantee that their work will be of high quality and will last a long time. They will also be able to tell you whether your problem is a minor one that can wait or an urgent one that needs to be fixed right away.
Another benefit of hiring an emergency plumber is that they will be able to save you from costly repairs in the future. For example, if you have a leaky pipe and it doesn’t get fixed immediately, it can cause serious damage to your property. The water from the leaking pipe can ruin your walls, floors, outlets, and other parts of your house. A good emergency plumber will be able to find the source of the leak and fix it before it gets worse.
An emergency plumber will also be able to solve other issues that you might have. For instance, if your drains are blocked, they can clean them for you. They will also be able to detect any gas leaks and fix them as soon as possible. A gas leak can be very dangerous for your health and can even lead to a fire in the event of an accident.
A good emergency plumber will be able to offer you a wide range of services, including installing new fixtures, repairing existing ones, and replacing old ones. They will also be able to give you advice on how to prevent plumbing emergencies in the future. In addition, they will be able to handle all kinds of plumbing emergencies, from minor ones to major ones.
Power Lead System Review
The Power Lead System is a complete all-in-one marketing platform and business opportunity that was launched in 2013. It’s owned by two online marketing specialists, Neil Guess and Michael Price.
The company claims that their products are not scams, but they do have an affiliate program. They make money by selling their marketing tools and recruiting new members to join the program. Read on Power Lead System Review to learn more.
If you’re an affiliate marketer, you might have heard of the Power Lead System. It’s a suite of marketing tools that can help you grow your business and increase sales. It’s also an MLM program, meaning you can earn money by recruiting other people to join the program.
PLS is a legitimate business, but you should be cautious about the type of income it claims to offer. This is because not all business models are equal, and some may be scams. The good news is that PLS has a good track record and a B+ rating from the Better Business Bureau.
In addition to the marketing tools, PLS also offers a training course that can teach you how to start a lead generation business. The course teaches you how to find leads online and then send them offers for your products or services. This can be a great way to make passive income in your spare time.
While there are many MLM programs out there, PLS is unique in that it provides a full range of marketing tools and a training course that can help you build a successful business. Additionally, it’s also a very affordable program. It costs $30 per month for a customer account, and you can earn commissions on all the products you sell.
PLS is a great option for beginners and intermediate-level marketers who want to build a sustainable business. The program has a proven track record and a generous compensation plan. It’s also easy to use and has a variety of tools to help you grow your business.
One thing to keep in mind when using a lead generation system is that it can be a huge time-waster if you’re not careful. A bad system can lead to unqualified leads and can also distract you from working on your main business. That’s why it’s important to choose a system that can be integrated with your existing website and has built-in autoresponders. Additionally, it’s a good idea to promote a system that offers multiple lead capture pages so you can maximize your exposure. In addition, you should look for a program that offers support via Google Hangouts and Facebook groups. These are both great ways to get quick, personalized help.
Does the Power Lead System work?
The Power Lead System is a program that is designed to teach you how to earn money through lead generation businesses. It claims to be the most powerful all-in-one marketing platform and comes with an attached business opportunity through which you can promote the program to earn extra income online. However, the main thing that might make you skeptical about this program is that it requires you to pay money upfront before you can start earning. This is a pretty common thing with MLM programs, as they tend to be more focused on getting you to spend money than making you money.
The program was created in 2013 and has been growing steadily since then. It currently has a B+ rating from the Better Business Bureau and only one complaint on record. It is also owned by two online marketing specialists who are real-deal entrepreneurs. This fact should put your mind at ease that it is not a scam, as most MLM companies use fake names and stock images to create an owner persona.
While the PLS system does provide a lot of valuable tools, it is important to note that it can take a while before you start seeing results. This is especially true if you are new to online marketing. In addition, the PLS program is heavily focused on paid traffic methods and high-ticket products, which can be very expensive. So if you’re not comfortable spending a lot of money on advertising, you may want to look elsewhere.
The good news is that you do get a free trial period with the PLS system. This way, you can test it out and see if it is right for you before committing any money. During the free trial period, you can try out their marketing tools and training to see if they are the right fit for your business. Then, if you decide to continue with the PLS system, you can choose to pay their monthly fee of $30 per month. This fee covers your access to all the PLS marketing tools and training. If you want to earn a commission from your referrals, you can choose to be paid via bank wire or the global eWallet called Paylution. In either case, you’ll be able to earn a nice passive income from your referrals. The PLS team also conducts weekly training classes and webinars to help their members succeed in the affiliate business. This support is an excellent bonus for anyone who wants to build their own home-based business.
Final Words
Power Lead System is a multi-level marketing business that claims to have a proven model for success. It provides you with an income stream through sales of their own products (Lead Lightning) as well as overrides and residual commissions on the sales of other members in your network.
Despite its promises, PLS isn’t really the best option for newcomers to online marketing. It’s quite expensive, and the training is mediocre at best. Additionally, they push you hard into recruiting other people to make money, which is not beginner-friendly.
The platform is quite useful for marketers who already have their own products and want to boost their sales. It comes with a “free lead system” funnel, high-converting sales videos, custom Google Hangout pages, personal autoresponder messages, audio postcards, and more.
However, if you’re looking for a better alternative to Power Lead System, I would recommend checking out my #1 recommended marketing platform, which is much cheaper. It also provides a lot more training and support than PLS. Plus, you can use it for any program you like in addition to Lead Lightning. So go ahead and check it out if you’re interested! And let me know your thoughts in the comments below!
Tips On How To Deal With A Plumbing Problem
If you are having issues with your plumbing, you want to make sure that you are taking care of the problem in the best way possible. It may take quite a while to find the real fix to a problem, but with good guidance, you can get things back together and running with confidence.
Use the sounds you hear from your pipes to help you to determine what they problem is. Certain sounds mean the water pressure is too high. Other sounds can signify loose pipes or slight clogs from calcium or iron build up. Listening to your pipes can save you a lot of money hunting down the problem.
Install screen traps or drain covers on all of your sinks and tub drains. Most home plumbing calls are about clogged pipes. These can be caused by debris, especially hair, washing down the drains. Putting in a trap means that you can clean this debris off before it ends up in the pipes.
Think about what plumbing work you need, then schedule them all at once. By doing so, you can save up enough money to pay for the repairs. This can save you money since plumbers generally charge hourly, as they can’t charge multiple hours per trip if it’s only one trip out.
You should drain all of the water out of the tank of your hot water heater at least once every three to six months. Draining all of the water out of the tank helps to prevent sediment build-up at the bottom of the tank. This sediment can cause the tank to bang or to heat less efficiently.
The next time you prepare to take on plumbing issues, give these tips a once over first. Get the best professionals and take care of what you can so that you can save some money. These tips deserve to be used.
Teaching Artists Organized, Queen City PYT, Box Fila, , Hunting Ton Conservatory, The Cure For Jet Lag, Sell My Home Miami, The Curious Thing, ETF-Settlement, APMD Members, Stemgineering Academy, Search-Engine-Fuel, Miami Luxury Town Homes Biltmore, Auto Claims Help, STS Royal, Renew Angel, Tide Tamer Water Front Products, Veranda 804, Culture Kitchen, Fluidic Mems, BHW Translation, Plant Based Toronto, Valley Find Me, Natures Biorganic, Narec Solar, Ameristain Roofing, Diy Investor Resources, Just A Fair Trade, Carlos Prada, The Kap Group, Midwest Grill Saugus, C Fraser Smith, Informational Connectivity, Dallas Content Strategy, DFI-Effc 2018, Rimamassasati, Small-Business-Place, Norwalk Lamirada Plumbing Heating Air Conditioning, Back To The Kitchen, I Love The Love Kitchen, Robert Harris Homes
4 Plumbing Quick Fixes You Should Learn
>
When a pipe bursts or an appliance starts to leak, you can’t always afford to wait for a plumber. Water damage will take its toll quickly. Knowing a few basic but important plumbing quick fixes can make a big difference in how you recover from a plumbing disaster.
Here are some easy repairs you can perform to minimize damage before your local smell good plumber arrives on the scene. These simple stop-gap solutions may not sound like much, but they could save you money and spare your home from greater catastrophe.
Leaking Pipe
No matter how small a pipe leak is, you don’t want water pouring out into your home. Even small drips can develop into big problems. Luckily, there are plenty of home plumbing tools designed to help you make quick fixes to prevent disaster.
Whatever method you go with, start by turning off the water. and measuring your leaking pipe’s circumference.
How to turn off the water
To turn off the water to a leaking pipe locate the nearest shut off valve. Sinks and toilets will have a small knob underneath where the water supply connects. Showers and tubs often have an access panel on the opposite side of the wall. Simply turn the shut off valve counterclockwise to stop water from flowing.
If your leak is not located near a local shut off valve, you may need to turn off the water to your entire home until the leak is addressed. Locate your water main where the city water supply enters your home. It will have a knob or lever type valve where you can shut off the water supply into your home.
The right repair supplies
Your nearest hardware store should have what you need to temporarily stop leaking pipes until they can be replaced. If you have iron pipes, purchase an epoxy compound. If you have copper, PVC or other, purchase a pipe clamp or wrap.
To repair a leaking iron pipe: Apply epoxy directly onto the leaking pipe, like you would with caulk or plumber’s putty. The epoxy will temporarily form a seal over the leak.
To repair leaking PVC or copper pipes: Affix the pipe clamp or wrap around the leak. The pressure should hold in the water until you can get the pipe replaced.
Remember that none of these three products offer a permanent solution. While they function admirably as quick fixes, the only foolproof way to be rid of a plumbing leak permanently is to replace the pipe.
Leaking Pipe Joint
Leaking pipe joints are a little trickier than normal pipe leaks. The angle of the joint can make quick repairs awkward or ineffective. Luckily, there are a few tools designed specifically for administering quick fixes to vexing leaks like these.
Repair sleeves and rubber pipe connectors are flexible enough to wrap around a leaking joint and will press in on it to squeeze water back through the pipe.
To use a rubber pipe connector or repair sleeve: Measurement is important here. Cut rubber pipe connectors so they fit tightly around the leak. The rubber of the connector resists water if it’s wrapped tightly enough, but it won’t last forever. Repair sleeves work well on smaller joint leaks. Add a clamp over your rubber wrap to hold it in place.
Over time, however, the leak may grow wider than the sleeve. In a real pinch, you could supplement either of these tools with duct tape, but keep in mind how temporary a solution it would be.
Cracked Porcelain
Toilets, bathtubs, sinks, and showers can crack or break just like anything else. Unlike everything else, however, these appliances are sometimes full of water. It’s easy to panic if the bottom of your toilet cracks open and starts flooding your bathroom. In cases like these, you’ll want to prevent the leak from damaging the floor as quickly as possible.
This is where our old pal plumber’s putty comes in. First, apply plumber’s putty to the inside of the leak. Try to squeeze it in as snugly as possible. Plumber’s putty naturally resists water, so it should hold for long enough. After you’ve squeezed the putty in as much as you can, apply caulk right over the top of it. The caulk will help form a secondary seal and lasts longer than plumber’s putty will, but it would be hard to put on without the putty. Neither the caulk nor the putty will last forever, however, so consider having your toilet, sink, or tub replaced soon after.
Faulty Water Heater
If your water heater isn’t working well, it’s likely that sediment has collected in the tank. When a layer of sediment builds up at the base of a water heater tank, it blocks the heating element. The water heater wastes time and power trying to heat through the sediment. You don’t get hot water as quickly, and your water heater becomes strained. All water heaters need to be replaced eventually but flushing your tank can extend its lifespan significantly.
To flush your water heater
First, turn off the water heater. Run hot water in a sink for about 10 minutes to drain the tank of hot water. Shut off the cold-water supply on top of the tank, and then attach a garden hose to the drain valve. Make sure the hose leads to the nearby floor drain. Re-open the cold-water supply WITHOUT closing the drain valve or disconnecting the hose. Watch the water drain until you can’t see sediment discoloration in it.
For Plumbing Emergencies in L.A.
Try these quick fixes for any of the above plumbing emergencies and then call us right away. We can fix your emergency quickly, effectively, and permanently. Mike Diamond has been on the Los Angeles scene stopping all manner of home plumbing problems since 1976.
The post 4 Plumbing Quick Fixes You Should Learn appeared first on Mike Diamond Services.
Did you miss our previous article…
https://www.norwalklamiradaplumbingheatingairconditioning.com/?p=303
What’s That Smell in My Kitchen?
Do you have a mysterious, unpleasant odor in your kitchen? Something that doesn’t go away, no matter how many times you mop or take out the garbage? Check your kitchen sink.
Your kitchen sink might be the hardest working plumbing appliance in your home. If there’s a problem with it, chances are the food you run through the disposal or the grease you rinse off dirty plates isn’t getting properly removed from your house.
When food or grease gets caught in your kitchen sink’s pipes, it begins to rot. Rotting food or other debris can produce terrible smells and become a breeding ground for bacteria and pests. Even if you don’t have a disposal, the kind of stuff that drops down the kitchen sink’s drain can collect and start to smell surprisingly quickly. If your kitchen sink has a sour odor that you just can’t scrub away, here are a couple possible explanations and what you can do about it.
Grease in the Drain
If you pour cooking grease or vegetable oil down your kitchen sink’s drain, it can congeal to the sides of the drain, disposal, or lower pipe. Then, the grease starts to decompose and trap other falling debris. Soon, an unruly rotting smell wafts back up out of the sink and into your kitchen.
Scoop about a cup of baking soda into your kitchen sink’s drain. Follow that up with about as much vinegar, then let it sit for about ten minutes. While the mixture is doing its thing, boil a pot of water. When ten minutes have passed, pour the boiling water into the sink. The baking soda and vinegar should foam up and eat away the grease in your drain, and then the boiling water will flush it all out.
Dirty Garbage Disposal
Sometimes, scraps of food or other gunk can catch on your garbage disposal’s blades. That food rots and starts to smell. Problems increase if:
You use your garbage disposal often.You run hot water with it.,You run no water.Your garbage disposal is older.
Grab about two cups of ice cubes and a cup of salt. Turn on the kitchen sink’s cold water and run the disposal for about 20 seconds. After that, dump the cups of ice and the salt into the disposal. Let the disposal keep running until all the ice cubes are gone. Cutting up the ice in cold water should have helped clear away the gunk caught on the blades.
For extra odor prevention, drop lemon, grapefruit, or orange rinds down the disposal while you’re running it with the ice. You can also add lemon juice and vinegar.
Problem with the Trap
If your kitchen sink smells more like sewer than rotten food, there might be a problem with its trap. A kitchen sink’s trap is the ‘P’ or ‘U’-shaped pipe directly beneath the sink basin. The trap’s job is to prevent sewer gas from drifting from the pipes back up into your house. It’s also handy for recovering lost wedding rings.
Usually, a sewer smell means that the water in the trap that blocks sewer gas has evaporated. This can happen if the sink hasn’t been used for awhile. If that’s the case, all you should have to do is run the sink and let the water fill back up in the trap. Watch the trap while running the water to make sure it isn’t leaking.
If that doesn’t fix the problem, take the trap out, empty it, scrub it down with an old toothbrush and a cleaning agent, and replace it. Clogs can build up in kitchen and bathroom traps. They may need to be cleaned periodically but if the problem persists, give us a call.
Clogged Vent
If there’s a sewer smell coming from your sink and you don’t think the trap is the problem, the next most likely culprit is the vent. The plumbing drain vent is basically a long, narrow, vertical shaft connecting your main sewer line to the outside air. This shaft vent stabilizes the pressure inside the pipe connecting to your sewer. Without it, water may siphon out of your sink’s trap, letting sewer gas in.
Plumbing vents are located on the roof of the house. When they’re not working, it’s usually because something is obstructing it, such as a bird’s nest or a piece of debris. There could also be a leak in the vent’s shaft, which would interfere with its pressure mitigation or could even let sewer gas into your house. In either case, you may want to consider calling a professional. Clearing a vent obstruction may not sound like a big job, but roof jobs are always trickier than they seem.
Keeping L.A. Smelling Good
If your kitchen sink smells, hopefully one of these quick fixes solves the problem. If the stench is coming from a simple clog, try plunging with a cup plunger.
If you’ve tried everything and you’ve still got a bad smell, give us a call. There’s more than one reason Mike Diamond is your “Smell good plumber.” With our pipe cleaning technology and years of experience, we guarantee we’ll find and solve your problem and get your kitchen smelling fresh again.
The post What’s That Smell in My Kitchen? appeared first on Mike Diamond Services.
Did you miss our previous article…
https://www.norwalklamiradaplumbingheatingairconditioning.com/?p=273
How Do I Determine The Right Size Furnace For My Home?
>
When it’s cold outside (even in LA), you need the right furnace to heat your home evenly and efficiently. A furnace can only do its job properly if it’s the right size for the space it’s heating. Too big and it will switch on and off frequently, too small and it will run constantly. Neither is ideal.
A small furnace will lead to high energy bills, uneven heating, and a shorter lifespan. Not to mention the fact that you’ll probably still be cold. A furnace that’s too big, on the other hand, might make parts of your home uncomfortably hot while leaving other areas unproperly heated. This constant cycling in short bursts could wear it out quickly. To avoid these problems, learn how to choose the right sized furnace for your home.
How do I determine the right size furnace for my home?
Gas furnaces are differentiated by their BTU capabilities. BTU stands for British Thermal Units. One BTU represents the amount of energy required to heat one pound of water by one degree Fahrenheit. To determine the proper BTU you’ll need for your home’s heating, you’ll have to do a little math.
First, find out the square footage of your home.
You should be able to find this number on the paperwork you received when you purchased your home. If you can’t find that, you can calculate the square footage yourself.
Start by measuring the length and width of each room in your home. Multiply the length and width of each room together to get the square footage of that room. Then simply add together the square footage of all your rooms.
Don’t include rooms that don’t have ductwork or rooms you don’t plan on heating, like garages or sunrooms. Most furnace size charts operate under the assumption that your ceilings are eight feet high. If your ceilings are higher or lower, make changes to your calculation accordingly.
Determine which climate zone you live in.
The United States is divided into different climate zones, each with its own BTU per square foot recommendation. To heat a home in Minnesota takes more BTUs than a home in Florida. Living in California, your furnace won’t have to be heavy duty.
If you’re working with Mike Diamond, then your home lies in Zone 2 – a hot-dry or mixed-dry climate zone. In Zone 2, you need 35-40 BTUs for each square foot of your home.
Calculate the furnace size you’ll need.
To determine the number of BTUs you need to heat your home: multiply your square footage by the zone heating factor. If your home is well insulated, use the lower number. If your home is not well insulated or has other factors that may make it harder to heat, use the higher number.
For example: in a well-insulated L.A. home that is 2,000 square feet our equation is:
2,000(sq ft) X 35 (zone factor) = 70,000 BTUs
For this home, we need to install a furnace with a rating of 70,000 BTUs. But we have one more step to finding our perfect furnace.
Calculate your new furnace’s actual output.
When you shop for your new furnace, you’ll notice two numbers on it. The first is the amount of heat it will produce in BTUs. The second number is its efficiency rating. To calculate the actual BTU output of any furnace, multiply the two numbers. For example, a furnace capable of 100,000 BTUs at an efficiency rating of 80% will actually produce 80,000 BTUs of heat:
100,000 X 80% = 80,000
Make sure you calculate this properly before installing a furnace that is too small for your space.
Reference a furnace size chart.
You can also compare your home’s square footage to a furnace size chart. There are a number of different furnace size charts out there. These charts give comparisons between home square footage and the BTUs needed to heat it. It’s not as accurate as calculating it yourself. Most charts follow guidelines similar to these:
A 1,200-square-foot home will require between 35,000 and 75,000 BTUs A 1,500-square-foot home will require between 45,000 to 90,000 BTUs A 1,800-square-foot home will require between 55,000 to 110,000 BTUs A 2,100-square-foot home will require between 65,000 to 125,000 BTUs A 2,400-square-foot home will require between 75,000 to 145,000 BTUs
Expert Furnace Service and Installation in Los Angeles
If you’re interested in updating or upgrading your home’s furnace, give Mike Diamond a call. Our expert technicians can answer your questions about the make, model, and size of the perfect furnace for your home. We’ll be able to get your just right furnace installed quickly and efficiently.
The post How Do I Determine The Right Size Furnace For My Home? appeared first on Mike Diamond Services.
Did you miss our previous article…
https://www.norwalklamiradaplumbingheatingairconditioning.com/?p=258
What to Do When Someone Puts Dish Soap in Your Dishwasher
>
There’s only one main difference between dish soap and dishwashing detergent, but it’s a big one. Dishwashing detergent does not create suds, but dish soap does. The idea of a dishwasher overflowing with bubbles might paint a funny picture but it’s also big, messy problem. If you accidentally put dish soap in dishwasher once, it’s a headache. If it happens more than once, the soap scum build up could eventually damage your dishwasher.
If the worst happens and you find yourself facing an endless soap avalanche, don’t fret. We’ll tell you how to clean out a dishwasher with dish soap in it. More importantly we’ll tell you how to restore your dishwasher to prevent future problems. If your dishwasher doesn’t work properly after these steps, call the pros at Mike Diamond to help.
How to Fix Dishwasher with Dish Soap in It
First things first, stop the dishwasher immediately. Cancel the wash cycle. If you’re lucky, the suds haven’t quite overflowed just yet. The sooner you turn off the dishwasher, the better your chance of keeping the suds out of the machine’s inner workings.
Once you’ve canceled the cycle, your dishwasher should start draining. It won’t clear everything out, but it’ll make the clean-up process a little less damp.
Clean up any overflow.
If you couldn’t stop the cycle in time, you’ll have some cleaning up to do. Don’t let water sit and seep into cabinetry or floorboards. Use a wet mop to clean up the overflow. Since the mixture is water and soap, wiping it up with dry towels can leave residue behind.
Silver lining: your floor is now clean.
Take out the dishes.
Before you clear out the pipes and drain, you’re going to have more sopping up to do. Open the dishwasher after it finishes its initial draining. Remove the dishes and move them into the sink.
Rinse off the dishes in the sink to remove any scummy residue that might have clung to them during the overflow. Consider washing the dishes by hand just this once, while your dishwasher is… recovering. Otherwise, just rinse them off and leave them in the sink. After you’re done cleaning, you can simply put the dirty dishes back in the washer for another cycle!
How to get suds out of the dishwasher.
This is the labor-intensive part. You’re going to have to rinse out and dry the inside of your dishwasher. If you don’t clean it fully, you’ll continue to have problems with suds and soap scum.
Use a small bowl or pan and repeatedly fill it with clean water to rinse away bubbles. If your dishwasher is close enough to your sink, you could use your sprayer to rinse it out.
Keep rinsing until bubbles don’t appear when you pour the water into the inside and bottom of the appliance. After you’ve rinsed enough, use towels to wipe down and dry out any remaining water. You may have to remove the drawers to complete this step.
Turn on the rinse cycle and let it run.
You don’t have to do a full cycle. Run the rinse cycle for three to five minutes. It should be enough to remove any remaining suds. If you’ve done everything else listed here, you should be free of dish soap in your dishwasher. If there are suds, the rinse cycle will wash out any remaining residue. Once that’s done, your dishwasher should be back in working condition.
Don’t Put Dishwashing Soap in Dishwasher!
Now you know what happens if you put dish soap in the dishwasher. Hopefully you’ve successfully flushed your dishwasher after the soap suds fiasco and lived to tell the tale. The next time this or any other plumbing emergency happens give us a call. The team at Mike Diamond is happy to service your dishwasher to ensure you have clean dishes for a long time.
The post What to Do When Someone Puts Dish Soap in Your Dishwasher appeared first on Mike Diamond Services.
Did you miss our previous article…
https://www.norwalklamiradaplumbingheatingairconditioning.com/?p=233
What to Do if Your Tap Has Rusty Water
You just woke up and you’re about to brush your teeth. You stick your brush under the tap, turn the water on, and… a stream of brown, cloudy mush drizzles out. Rust colored water isn’t normally harmful but it can be disturbing. The causes can range from corroded pipes to mineral build up to utility company operations.
Seeing your home’s tap water turn rusty is a traumatizing experience, especially if you don’t know why it’s happening. That’s why we put together this primer to explain why your water is rusty looking. If the reason for your home water discoloration is rusty pipes, we’ll explain what you can do about it. We want all Los Angeles residents to have clean, safe drinking water in their homes.
What Makes Water Brown?
Tap water looks rusty brown, yellowish, or reddish when it contains an excess of sediment or minerals.
The most common discoloring minerals present in water are iron and manganese. Tiny metallic deposits of these minerals can get into the water stream via several different sources – natural or manmade. These minerals can also be responsible for any unpleasant tastes or smells your water might have.
Is Rusty Water Dangerous?
It depends on the particular minerals in your water, but probably not. The EPA regulates the treatment of drinking water contaminants according to primary and secondary standards. Dangerous contaminants like lead and arsenic are covered by the primary regulations. If these contaminants exceed a maximum contaminant level in a water supply, it (usually) isn’t supplied to the public.
The secondary EPA regulations cover contaminants like iron and manganese. These contaminants aren’t dangerous to health but taste, smell, or look bad and could stain clothing or cause skin rashes. Public water systems are compelled to test for primary contaminants on a regular basis but testing for secondary contaminants is unfortunately voluntary. Rusty water might be gross and inconvenient, but it’s not actually dangerous to drink or bathe in.
Why Is My Water Brown?
Any of the following symptoms could cause brown water from the faucets in your home. Diagnose your water problem using these three common scenarios:
If all your hot and cold water suddenly goes brown:
It may be the result of a nearby break in a city-operated water main or fire hydrant. Much of America’s plumbing infrastructure is outdated, so water main breaks that release sediment into the water supply happen frequently.
It’s also possible that either your water heater or your water supply pipes have become rusty or corroded, and you’re just now starting to see the effects.
If only your hot water is discolored:
Sediment or rust may have built up in your water heater’s tank.
If you get brown water from your cold tap and only certain faucets:
The problem is probably with a particular water supply pipe.
How To Fix Reddish Brown Water
Now that you have an idea of what caused your rusty water discoloration in the first place, you know where to start:
If all your hot and cold water suddenly goes brown:
Call your water supply company. Chances are, something happened to a water main or a nearby fire hydrant. It’s also possible that the city is conducting maintenance on the pipe system, and they inadvertently stirred up some sediment. They should be able to tell you when your water will clear up again and what they’re doing to fix the problem.
Once the utility work is done, run your taps for a few minutes until you no longer see orange water coming out of your faucets. Brown water in toilets should disappear after a couple of flushes refresh the water supply.
If all your hot water is discolored:
Try draining and flushing your water heater’s tank. Rusty hot water is often the result of sediment that’s built up over time. It’s a good idea to drain and flush your tank twice a year. Sediment buildup isn’t just bad for your water; it’s one of the most common causes of water heater leaks.
If you flush the tank or have a newer water heater and your hot water is still off-colored, you may have a more significant problem. Call a professional plumber to diagnose the issue. Too much sediment buildup could permanently damage your water heater, or (in rare and extreme circumstances) cause it to explode!
If your cold water is only discolored when it comes out of a few faucets:
Start by running those faucets at full pressure for about several minutes or until the water clears completely. Sometimes, a small amount of rust may dislodge from the inner walls of a pipe and enter the water supply. If the problem is that minor, simply running the water should clean out the rust and clear the water again.
If your water still looks rusty after running it, however, or if the problem returns shortly after you flush the rust, it may be because your pipes have corroded. When too much corrosion or rust builds up on the pipe walls of your home’s water supply pipes, then minerals will leach into your water constantly, and you will continue to have brown water from your cold tap.
If you have a corroded or rusted pipe, you should have it deep cleaned or replaced ASAP, before it causes even more serious problems. Corroded pipes can lead to clogs and possible leaks or breaks in your water line.
Get Rid of Brown Rusty Water in Your Home
If you’ve tried everything and remain frustrated by rusty water coming from your tap, remember that Mike Diamond has your back. Give us a call, and we’ll diagnose why your faucets are spewing out that ugly brown stuff and make sure your pipes are transporting clean, clear water to you and your family.
Nobody in Los Angeles should have to shower in–much less drink!–rusty water. We’ll make sure you never have to.
The post What to Do if Your Tap Has Rusty Water appeared first on Mike Diamond Services.
How to Fix a Loose Toilet Handle
>
A loose or wiggly toilet handle can be annoying. A toilet handle not flushing at all is even worse.
Luckily, a loose toilet handle is a minor toilet problem and one that’s usually easy to fix. Here’s how you can fix a broken toilet handle, either by tightening or replacing it.
How to Tighten a Toilet Handle
Close the toilet seat cover.Keep parts or tools from falling in.
Remove the toilet tank cover.Use two hands as it may be heavy and set it on a flat surface where it won’t fall or crack.
Shut off the water supply to your toilet.The shut-off valve should be located near the base towards the back of your toilet.
Press the toilet tank lever to empty the water from the tank.This allows you easier access to the inside of the handle.
Find the toilet handle nut.It will be on the inside of the porcelain wall adjacent to the handle. This is probably the source of your loose toilet handle.
Tighten the toilet handle nut.Use an adjustable wrench or pliers clockwise to ensure the nut fits snuggly. Do not over-tighten – it could cause your porcelain tank to crack.
Depress the toilet handle to test.If it feels and sounds better, well done. If not, read on to learn how to replace a toilet handle.
Turn water supply back on.Turn the shut-off valve counter clockwise to open. Your tank will refill.
How to Replace a Toilet Handle
Determine what hardware you’ll need for your toilet lever replacement. Most hardware stores sell universal toilet handles, but you may need a specific variety. Look up your existing brand name, model, and make to see what type of flush handle replacement will work.Close the seat, remove the tank lid, turn off the water and empty the tank. (See 1-4 above.)Look inside the tank and unclasp the chain clip that’s attached to the lever. This is a small chain hooked onto the inside portion of your toilet handle.Remove the mounting nut. This is the same nut you would have tightened in the first walkthrough up above. Use a wrench or pliers to unscrew the nut (counter-clockwise) and take it off. Pull the old handle out. Once the nut and chain holding it in place are removed, you can pull it out by hand. You might have to angle it a bit to get it out, but that’s normal.Unscrew the mounting nut on the new handle nut, but don’t lose it. The nut may be metal or plastic.Insert the new lever into the tank to match the position of old one. You’ll know it’s in right when the handle is flush with the side of the tank. Secure the handle from inside the tank with the new mounting nut.
Attach the chain to one of the holes in the lever. There are usually a few to choose from. You want around one inch of slack in the chain so that it flushes properly. Try a few of the different holes in the lever until you find the right length.Turn the water back on and test it out. It should flush easily, without rattling.
Congratulations! You now know how to install a toilet handle.
By following these steps, you have hopefully fixed or replaced your loose toilet handle.
If your toilet handle broke or keeps coming loose, get in touch with Mike Diamond. We’ll diagnose the problem and make sure your toilet is working properly. No matter what your toilet question, Mike Diamond – your trusted LA plumber – has the answer.
The post How to Fix a Loose Toilet Handle appeared first on Mike Diamond Services.
Did you miss our previous article…
https://www.norwalklamiradaplumbingheatingairconditioning.com/?p=197
How to Unclog a Bathroom Sink
>
The best method to unclog a clogged bathroom sink may depend on what’s clogging it. You can flush soap scum clogs with vinegar and baking soda or tweeze hair. For bigger clogs, a plunger or drain snake work best. Figuring out why your drain is clogged is the best way to figure out how to unclog it.
Below are six methods that address how to unclog a sink drain. Most of these apply to kitchen sinks and showers drains too. Roll up your sleeves and get started. If your bathroom sink is completely clogged or your sink is full of water that won’t budge, your Los Angeles plumbing experts are on hand to help.
Why is my bathroom sink clogged?
There are four common reasons why most people’s bathroom drains clog. Figuring out which one of these problems you have will give us a place to start. Look for:
Clumps of hair
When hair enters your sink drain it clumps together and gets stuck on the walls and tangled in the drain’s components.
Use a long tweezers or a zip-it tool to remove hair. If neither works, try disassembling the whole drain. (see “clean the p trap” below)
Soap scum
Soap scum is especially prevalent where there is hard water. It can build up in your pipes over time and foster mold and mildew.
Pour a pot of boiling water down the drain or use baking soda and vinegar to dislodge built up soap scum. If it still doesn’t budge, plunge with warm water.
Something stuck in p-trap
The p-trap is the curving pipe beneath your bathroom sink that connects to the wall pipe. It prevents harmful sewer gasses from coming up through the sink drain.
Disconnect your bathroom sink p-trap and clean out the hair and any large items that may have gotten stuck within (see details below).
Damaged pipes
Rust, corrosion, and other common pipe damage can lead to a slow drain or a clog over time.
Replace old, rusted pipes before they become bottled necked with debris. Plunge or snake them for temporary relief.
Unclogging your sink
After you’ve figured out why you have a clogged drain, try the method we recommended for your problem above. If you can’t figure out what your drain’s problem is, then try each of these methods in order.
Note: Never use chemical drain cleaners.
1. Baking soda and white vinegar
Unscrew the drain cover and remove the sink stopper.Measure out a ½ cup of baking soda and 1 cup of white vinegar.Sprinkle the ½ cup of baking soda into the drain.Pour the cup of vinegar down the drain.Let the mixture sit in the drain for several minutes, until fizzing stops.Rinse hot water into the drain.Repeat the process up to three times.
2. Remove bathroom hair clog
Remove the stopper.Use a flashlight to look down the drain.If you can see hair, use a long-nosed tweezers to retrieve it directly.If you can’t see hair, use a zip-it tool or bend and insert a wire hanger to retrieve it.Slide the tool up and down the drain as far as it will go naturally. Don’t attempt to force it.Push the tool in at different angles. Try to move it around the drain to catch more hair.Repeat the process several times, rinsing with hot water as necessary.
3. Plunge
Use a cup plunger.Remove the stopper.Seal the sink overflow outlet with tape or a rag.Place towels or rags on the floor around the sink.Fill the sink with warm water.Use the plunger’s cup to create an airtight seal over the drain.Pump the plunger’s seal up and down several times with quick, sharp movements.Test the drain to see if you’ve cleared the clog.Repeat a few times as necessary.
4. Clean the p-trap
Put a bucket under your p-trap and wear rubber gloves.Loosen the slip nuts by hand or with a pliers as necessary.Remove the p-trap by hand and dump the water into the bucket.Remove objects and grime lodged in the trap.Clean the p-trap with a bristle brush.Put the p-trap back together and test the drain.
5. Snake
Use automated drain snakes (called plumber’s snakes or plumber’s augers) if possible.Place towels or rags beneath the sink.Remove the p-trap.Remove the stopper.Thread the snake into the wall drain manually.Uncoil the snake using the handle.When you reach the clog, rotate the head up-and-down and back-and-forth.Pull the snake out and reassemble the sink components.Check the drain.
6. Dissemble the drain
Follow these directions to remove your sink drain. Replace old or corroded drains with a new one. A new drain can help your sink smell fresh again.
Bathroom sink plumbing for Los Angeles’ worst clogs
We hope you’ve learned how to fix a clogged bathroom sink. If you’ve tried everything and are still up to your elbows in water, contact the pros at Mike Diamond. Some clogs are stubborn or so far down your line that they require extra finesse. We know how to dislodge these tough clogs and get your drain flowing again.
The post How to Unclog a Bathroom Sink appeared first on Mike Diamond Services.